Pre-inspection Checklist

The American Canyon Fire Protection District is committed to protecting lives, property, and our community through proactive fire prevention and safety education.

Fire safety inspections are more than a compliance requirement — they are an opportunity to help ensure your business, employees, and customers remain safe. Preparing in advance helps identify potential hazards early and reduces the risk of fire.

Use the checklist below (printable version)(PDF, 54KB) to help your business get ready before your scheduled inspection. 

Fire Extinguishers

  1. Ensure all extinguishers are visible and easy to access.
  2. Confirm they have been serviced within the last 12 months.
  3. Check that gauges show “charged” and pins/tamper seals are intact. 

Exits & Pathways

  1. Keep all exit doors unlocked during business hours.
  2. Remove obstructions from exits, aisles, and hallways.
  3. Ensure exit signs are illuminated.
  4. Test emergency lighting to confirm proper operation.

Electrical Safety

  1. Do not use extension cords as permanent wiring.
  2. Replace damaged cords immediately.
  3. Avoid overloading outlets or power strips.
  4. Maintain at least 30 inches of clearance in front of electrical panels.

Fire Protection Systems

  1. Verify fire alarm and sprinkler systems have current inspection tags.
  2. Keep sprinkler heads unobstructed (no storage within 18 inches of the ceiling).

General Housekeeping

  1. Keep storage areas clean and organized.
  2. Maintain clear space near electrical panels and mechanical rooms.
  3. Store flammable liquids in approved containers.
  4. Dispose of oily rags in approved metal containers.

Address Visibility

  1. Make sure address numbers are clearly visible from the street to help emergency responders locate your business quickly.

 

Need Assistance? Our personnel are happy to answer questions or provide guidance before your inspection. Contact us at (707) 551-0650, or lprovencher@amcanfire.ca.gov.

Back to top